English Made High Quality Parts
These are made from 3mm steel rather than 2mm steel so much stronger than original
Hot Dipped Galvanised Sill rail kit for LH and RH side, complete with all bolts and brackets to fit
This fits:
All Defender 90 models 1983-2016
All 110 3 Door models 1983-2016
Series 2 & 3 88" Models
Does not fit 110 station wagon models as they require longer sections
These are the sections which run backwards from the foot of the bulkhead and connect onto the front of the body tub. The seatbox and floor plates also bolt to this section
Comes with the 2 vertical brackets at the back which attach to the tub, and also the 2 smaller brackets each side which bolt underneath and are what the outer sill panels bolts too
If you are replacing these sills, these brackets will normally be corroded too so makes sense to swap them as one full kit
The bolts supplied are stainless steel for longevity
The main sill rails are hot dipped galvanised and the brackets are stainless steel so none of it will ever rust
Quality Aftermarket Parts
