Set of 4 x Powder Coated Def Series Style Door Conversion For Defender 110 (No Cappings)

This is the full kit that you need to do the swap over all 4 doors on your 110 from push button doors to this 2 piece type! These will also fit Series 109 with second row doors.

These have been obsolete for years however we have spent the last 2 years developing the tooling to manufacture these to bring these back onto the market.

The parts in this kit are:

· Pair Of Our Bespoke Made Front Row Door Bottoms
· Pair Of Our Bespoke Made 2nd Row Door Bottoms
· Pair Of Fully Glazed Front Row Door Tops

· Pair Of Fully Glazed 2nd Row Door Tops

· 2 x RH & LH Anti Burst Handles

· 2 x RH & LH Strikers For Handles

· 4 x Door Top To Bottom Seals

· 2 x 3 Barrel Lock & Key Set

· 4 x Plastic latches

· 4 x Lock hole surrounds

· 4 x Series front door handle fixing kits

· 8 x 3/8th dome head screws for the plastic latches

· 8 x Captive Plates

· 8 x M6x20mm flaged bolt

In this kit, these are the only Series style defender door bottoms you will find in the world that are made specifically to convert all Defenders to the simpler and more robust Series split doors.

These doors and tops are steel frame with aluminium skins as per factory spec.

Our bespoke doors bolt straight onto any Defender 90/ 110/ 130 1983- present and replicate all of the original functions your vehicle needs. No extra modification or welding is needed; these simply bolt onto you existing hinges!

Benefits of converting to 2 part doors:

1. Much cheaper than new push button doors

2. Much simpler and less to go wrong as there is no winding window mechanism to go wrong!

3. These frames will not rot.

4. Lift up handles are much stronger against theft prevention as the lock design is stronger

5. Lift up handles are off-road safe as they do not protrude out of the door like the plastic push button handles do.

6. Much more elbow room inside the cabin

7. Removable door tops if you have a soft top or just wish to let more air in!